Original · Cursor 1.0 · 1:53–2:00YouTube ↗
Motionboard recreation

Rotating Logo Reveal

Motionboard shot: Rotate to Lockup

An object spins with a long ease-out and stops at the exact angle that forms the logo silhouette or the hero view of the product.

Seen in

YouTube ↗
YouTube ↗
YouTube ↗

How to make a Rotating Logo Reveal with Claude Code or Codex

Cut a cube into three stacked slabs with a gap of 0.05 of the edge and spin it around a tilted axis (0.62, 0.74, 0.26). The spin runs 2.5s (0.2–2.7s) for 1.62 turns, about 1.5 of them in the first second, on expo.out cubic-bezier(0.16,1,0.3,1) normalized to end exactly at 1, with no overshoot.

The end pose is isometric (rotX 35.264°, rotY −45°) with a vertex toward the camera, so the silhouette is a hexagon that matches the logo. A fixed orthographic camera grows it from 30% to 40% of frame height on the spin curve, and the three faces use three flat gray tones. At 5.0s a second shot flies three slabs in over 0.8s each, staggered 0.08s, and the lockup lands at 6.55–7.45s.

Press the copy button to send this recipe to Claude Code or Codex, or install the skill once with npx skills add krisyangdev/motionboard. The agent builds the slabs and the camera. Render an MP4 with HyperFrames, or port the GSAP timeline to your website.

npx skills add krisyangdev/motionboard
Full recipe

Why it works

The last frame of the rotation is the logo, and the motion shows where the flat mark comes from in three dimensions. Rotation speed keeps dropping, so the last 0.8s is a slow approach to the target. The material uses only three gray tones with flat light, so the angle reads clearly.

Spec

Timing
Film 10s. Spin 0.2–2.7s (2.5s, 75 frames): 1.62 turns, about 1.5 of them in the first second; fade-in 0.2–0.42s; still hold 2.7–5.0s (2.3s, 69 frames). Hard cut at 5.0s to the fragment-assembly shot: three slabs fly in from 5.14s, 0.8s each (24 frames), staggered 0.08s; lockup 6.55–7.45s (0.9s, 27 frames); held to 10s
Easing
cubic-bezier(0.16,1,0.3,1) (expo.out, normalized to end exactly at 1), no overshoot; rotation angle runs 1.62 turns × (1 − eased progress), and a tilt quaternion slerps to identity on the same curve; fly-in and lockup expo.out; fade-in smoothstep
Camera
Fixed orthographic camera, object centered; the hexagon silhouette height grows 324px→432px (30%→40% of frame height) on the spin curve. In the second shot the assembled mark is 300px tall, then shrinks to 150px and steps left to make room for the wordmark
Subject
A cube cut into three stacked slabs (gap 0.05 of the edge) flips around a tilted view-space axis (0.62, 0.74, 0.26); the end pose is isometric (rotX 35.264°, rotY −45°) with a vertex pointing at the camera so the silhouette is a hexagon matching the logo. The slabs sit staggered along the view diagonal until the final angle lines them up; bevel and face gradient fade out as the stone stops. In the fragment shot the slabs enter from the lower left, right and top, rotating 1.35–1.5 rad and scaling 1.25–1.3x→1x
Style
Near-black background #0b0b0c, three flat gray tones for three faces (top #ecebe7, darkest #5c5b58, left in between), no highlights; 180° shutter motion blur by sub-frame accumulation; wordmark Inter 600, 103px, #ecebe7

Prompt

Build a logo ending called Rotate to Lockup. Near-black background (#0b0b0c) and a fixed orthographic camera. A cube cut into three stacked slabs (gap 5% of the edge) fades in at the center over 0.2–0.42 seconds and flips around a tilted axis for 1.62 turns; use expo.out (cubic-bezier(0.16,1,0.3,1)) over 2.5 seconds (0.2–2.7s), so about 1.5 turns happen in the first second and the speed drops gradually, while its hexagon silhouette grows from 30% to 40% of frame height (324px to 432px). On the last turn the stone lands in an isometric pose (rotX 35.264°, rotY −45°) with one vertex pointing at the camera, lined up exactly with your logo outline; the slabs stay staggered along the view diagonal until that final angle. Hold still for 2.3 seconds with no overshoot. Use three flat gray tones for the faces (#ecebe7 top, #5c5b58 darkest, left in between), no highlights, with bevel and gradient only while it moves, and 180° shutter motion blur. At 5.0s cut to the second shot: the three slabs fly in from outside the frame starting 5.14s, 0.8 seconds each with expo.out, staggered 0.08 seconds, rotating into place and scaling from 1.3x to 1x to form a 300px mark. At 6.55s the mark shrinks to 150px and steps left over 0.9 seconds (expo.out) while the wordmark is uncovered from behind it (clip edge riding the mark, x −36px→0). Hold to 10s. Build it with Three.js: orthographic camera, custom flat-shaded material, rotation from an angle around a view-space axis plus a slerp from a tilt quaternion.

People describe it as

  • The cube spins and turns into the logo
  • It spins and stops at just the right angle
  • Fragments fly in and form a ring

Often confused with

  • Converging Logo RevealRotate to Lockup turns one object to a target angle; Converge to Mark gathers many elements and compresses them into one icon.
  • Outline-to-Solid RevealOutline to Solid goes from line to fill; in Rotate to Lockup the material stays the same and only the orientation changes.
Recipe file (.md)

FAQ

What is a logo reveal?

A logo reveal is a short animation that builds up to a brand mark and holds it on screen. Common techniques include spinning, assembling pieces and drawing outlines. This recipe uses a rotation that decelerates onto the logo angle.

How long should a logo reveal be?

In this film the spin takes 2.5s and the stop is held for 2.3s, and the second shot lands the lockup in 0.9s. The last 0.8s of the rotation is a slow approach, which gives the stop a visible landing.

Is it free to use?

Yes. Motionboard is free and MIT licensed, so you can use and modify the recipes and the films they produce in personal and commercial projects. The licence asks only that copies of the recipe files keep the copyright notice.

More Ending